Advanced Runflats Mobility System
ARMS Runflat systems are engineered to help maintain vehicle mobility and control after tyre pressure loss, puncture or severe tyre damage.
Runflat Technology
An ARMS Runflat is a safety and mobility device installed inside the tyre, around the wheel rim. When the tyre loses air pressure or suffers significant damage, the system provides internal support designed to help the vehicle remain mobile and controllable.
Its purpose is simple: give the driver or vehicle operator the ability to continue moving rather than being forced to stop immediately in an unsafe or operationally critical location.
Up to 80 km
Continued mobility after tyre pressure loss, subject to vehicle configuration and operating conditions.
Up to approximately 80 km/h under the conditions applicable to the specified configuration. Distance and speed figures are not simultaneous or universal values; both depend on the tested configuration, vehicle, load and operating environment.
ARMS Solutions
ARMS Runflat systems are configured for different vehicle categories, operating environments and load requirements.
Civilian & Armoured Vehicles
Designed for civilian and armoured vehicles requiring additional mobility after tyre pressure loss, without unnecessarily compromising everyday vehicle operation. Installed inside the tyre to help maintain control following a puncture.
Up to 80 km continued mobility
Subject to vehicle configuration, load and operating conditions. Distance and speed figures are not simultaneous or universal values.
Heavy-Duty Vehicles
Engineered for demanding vehicle applications, high loads and operational environments where maintaining mobility can be critical. Its high-resistance construction is designed for heavy vehicles and demanding operating conditions.
Over 5 tonnes load capacity per Runflat
According to the applicable product configuration. Load capacity varies with wheel, tyre, vehicle and configuration.
Tactical & Specialised Vehicles
Wheel + Runflat + Beadlock: an integrated three-piece wheel solution for tactical and specialised vehicles, designed for environments where mobility, serviceability and wheel retention are essential considerations.
Integrated wheel system
Designed for applications where ballistic resistance may be required. Refer to the applicable tested configuration and test documentation.
Product specifications, compatibility and performance vary according to vehicle, wheel, tyre, load and configuration. Contact ARMS for application-specific technical information.
The vehicle operates normally with the ARMS system installed inside the tyre.
Following a puncture or tyre damage, air pressure may be partially or completely lost.
The Runflat system supports the tyre internally, helping the vehicle remain mobile until a safer location can be reached.
Product detail
The Runflat is a physical component fitted around the wheel rim. Its construction, fixing points and internal profile are defined by the applicable ARMS configuration for each wheel and tyre combination.
Applications
ARMS solutions can be configured for different vehicle requirements.
Passenger vehicles and SUVs where a controlled exit matters.
Civilian and specialised armoured vehicles that need a secondary mobility layer.
Security-sensitive routes where an unexpected stop increases exposure.
Operational vehicles that must keep moving under demanding conditions.
High-load vehicles using ARMS HD configurations.
Specialised vehicles and integrated wheel systems for field operations.
Not sure which configuration fits your vehicle?
Tell us your vehicle type, wheel and tyre configuration and intended application.
FINABEL 20 A 5 Test References
ARMS Runflat systems are tested against FINABEL 20 A 5 requirements for continued mobility in road and off-road operating conditions.
FINABEL 20 A 5
Tested for continued mobility, resistance and performance under road and urban operating conditions.
Technical test documentation available on request.
FINABEL 20 A 5
Tested for continued mobility and performance in irregular terrain, demanding conditions and specialised operating environments.
Technical test documentation available on request.
80 KM
Continued mobility after tyre damage.
80 KM/H
Performance reference for applicable STD configurations.
*Actual performance depends on vehicle, tyre, wheel, load, damage and operating conditions. Refer to the technical specification of the selected ARMS configuration.
Distance and speed references apply only to the corresponding tested configuration and operating conditions and should not be interpreted as universally simultaneous performance values.
FINABEL 20 A 5 test references apply to the corresponding tested configurations. Product compatibility and applicable documentation should be confirmed for each vehicle and application.
Trust
Tell us about your vehicle and application. Our team can help identify the appropriate ARMS Runflat configuration.
Request informationContact ARMS
Tell us about your vehicle and intended application. The more technical information you provide, the more accurately our team can assess the appropriate ARMS Runflat configuration.
Fields marked with * are required.
